Dyno Cams Camshaft CL3 Low Durartion Grind, Buffed, Clone, Hemi

The CL3-B is buffed adding smoothness to the lobes.
The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower.
The DynoCams CL3 is legal for the current profile rules for stock classes.
The lobes are hardened for extra durability, extending the life of this cam.

Specs
Engine: 196cc OHV Clone, 212cc Hemi Predator
Recommended Class: Unrestricted Stock Classes
Target (MAX) RPM: 6400-6900
Spring Pressure (In / Ex): 10.8 lbs
Valve Lash (In/Ex): .003"
Ignition Timing: 32 Deg BTDC

Profile
Intake Exhaust
Open: 29.15 BTDC 65.95 BBDC
Close: 75.58 ABDC 41.55 ATDC
Lift: .2245" .231"
C/L: 114.0 ATDC 103.5 BTDC
DUR @ 50: 220.5 Deg 223.5 Deg
DUR @ 200: 82.1 Deg 92.95 Deg